Conventional domestic entry notification frameworks rely predominantly on acoustic propagation, presenting an institutionalized accessibility barrier for the deaf and hard-of-hearing demographic. While localized visual or haptic retrofitting solutions exist for permanent installations, they remain highly impractical for transitory, short-term rental, or travel accommodations where structural and electrical grid modifications are legally or structurally prohibited. This paper presents a novel, grid-independent, non-destructive assistive telemetry node designed specifically for temporary or mobile spatial environments. Utilizing a RISC-V based ESP32-C3 microcontroller, the system circumvents local spatial constraints by routing hardware-interrupt-driven trigger events over an automated network captive portal directly to a secure cloud broker (Telegram Bot API). The alert payload is translated at the user\'s mobile endpoint into multi-modal haptic-visual feedback streams, ensuring unconstrained geographical tracking. The hardware layer is packaged inside a custom additive-manufactured Polyethylene Terephthalate Glycol (PETG) enclosure optimized for rugged field mobility and tool-free deployment. Electrical characterization yields an optimized deep-sleep quiescent current floor of 7.2µA sustained via an ultra-low-power low-dropout (LDO) linear regulator stage. Empirical evaluations across eighteen distinct evaluation iterations demonstrate an overall mean end-to-end network latency of 5.86 seconds and a 100% transmission success rate, translating to a mathematically validated operational battery deployment shelf-life exceeding 14 to 16 months on standard commercial alkaline cells. Qualitative field evaluations with an assistive user cohort verify that the multi-modal notification pipeline significantly enhances situational awareness and independent living capacity without technical onboarding friction.
Introduction
The text presents a portable, battery-powered, cloud-connected assistive doorbell notification system designed for deaf and hard-of-hearing individuals, particularly those staying in hotels, rented homes, temporary accommodations or travelling environments.
Traditional assistive doorbell systems mainly depend on local Bluetooth connections, permanent electrical installations or audible alerts. These limitations make them unsuitable for people who need a portable solution that works across different locations. The proposed system addresses these problems through a wireless, battery-operated device that sends doorbell notifications directly to the user's smartphone through the internet.
1. Introduction and Problem Statement
Existing assistive technologies mainly focus on visual and motor disabilities, while auditory accessibility receives comparatively less attention.
Traditional doorbell systems create several challenges:
They depend on audible sounds that deaf and hard-of-hearing individuals may not detect.
Most assistive doorbells require permanent electrical connections.
Bluetooth-based systems have limited operating ranges.
Temporary accommodation users cannot easily modify building infrastructure.
Existing solutions may require additional receiver hardware or complicated application installations.
To overcome these limitations, the research proposes a portable, non-destructive and battery-powered notification device based on an ESP32-C3 RISC-V processor.
2. Literature Review
The research reviews three major categories of existing technologies.
A. Vision-Based Systems
Previous studies used ESP32-CAM modules to capture visitor images and send them through Telegram bots. Some systems also included voice-response features.
However, these systems consume relatively high power, often exceeding 150 mA during image capture and transmission, making them unsuitable for long-term battery-powered operation.
B. Assistive Notification Systems
Existing research has explored Bluetooth-based doorbells and vibration or light-based notifications.
However, these solutions have certain limitations:
Dependence on audible alerts in some systems.
Bluetooth communication restricted to approximately 30 metres.
Dependence on continuous 220V AC electrical power.
Limited suitability for temporary accommodation and travelling environments.
C. Identified Research Gaps
The proposed research identifies three major gaps:
1. Spatial Unboundedness: Existing systems rely on short-range communication. The proposed system uses Wi-Fi and cloud connectivity to deliver notifications over practically unrestricted geographical distances, subject to internet availability.
2. Grid Independence: Existing systems require permanent electrical infrastructure. The proposed device operates using three AA alkaline batteries.
3. Zero-Touch Network Onboarding: Existing solutions often require application installation or manually configured network credentials. The proposed system uses an automatic captive web portal to connect to different Wi-Fi networks without compiling or installing a native application.
3. Quantitative Technical Comparison
The proposed system is compared with an existing Bluetooth-based assistive doorbell architecture.
Parameter
Existing BLE System
Proposed System
Operating range
Up to 30 metres
Global cloud connectivity
Power source
220V AC
3 AA batteries
Idle current
Approximately 10 mA
7.2 µA
Network setup
Manual application configuration
Captive web portal
Installation
Fixed installation
Hanging or adhesive mounting
The proposed design aims to reduce power consumption, eliminate permanent electrical installation and provide remote notifications through cloud communication.
4. Proposed Hardware Architecture
The proposed device consists of five main hardware components:
ESP32-C3 Super Mini: Acts as the main processing unit, handling system operations, Wi-Fi connectivity and secure communication.
Holtek HT7533-1 Voltage Regulator: Converts the battery voltage into a stable 3.3V supply.
Three AA Alkaline Batteries: Provide a 4.5V nominal power supply without requiring building electricity.
1000 µF Capacitor: Helps manage temporary current spikes during wireless transmission.
Momentary SPST Push Button: Detects doorbell events through a hardware interrupt connected to GPIO3.
These components work together to detect an entry event and transmit a notification to the user's smartphone.
5. Mechanical Enclosure and Packaging Design
The device uses a custom-designed 3D-printed enclosure made from PETG (Polyethylene Terephthalate Glycol) material.
PETG is selected because of its:
High impact resistance.
Better UV stability compared with standard PLA.
Mechanical durability.
Suitability for different outdoor environmental conditions.
The enclosure incorporates:
Snap-fit assembly for easy opening and closing.
A silicone rubber gasket for dust and splash protection, targeting approximately IP54-level protection.
A flat rear surface for double-sided adhesive tape.
A lanyard attachment option for temporary installation.
This design allows the device to be installed and removed without drilling, wiring or permanently modifying the building structure.
6. Working Principle of the Proposed System
The overall working process can be explained as follows:
The user temporarily installs the device near an entrance.
The device is powered using three AA batteries.
During initial setup, the user connects to the device through its captive web portal.
The user provides the credentials of the available Wi-Fi network.
When a visitor presses the doorbell button, the ESP32-C3 detects the hardware interrupt.
The device prepares a notification and sends it securely through HTTPS.
The notification reaches a cloud messaging service, such as the Telegram Bot API.
The user's smartphone receives the alert, allowing them to know that someone is at the entrance, even when they are away from the door.
Conclusion
This paper has successfully demonstrated the design, implementation, and empirical validation of a highly portable, non-destructive assistive notification node engineered for rental property integration and travel contexts. By combining low-power RISC-V hardware architectures with wide-area cloud telemetry routing and onboard captive network portals, the system entirely removes the spatial and legal installation boundaries that restrict standard smart home devices.
Future research vectors will explore the integration of ultra-low-power passive infrared (PIR) sensing fields to execute proactive proximity tracking. Additionally, subsequent engineering iterations will focus on migrating the design framework to an upgraded micro-development board variant that natively exposes internal Analog-to-Digital Converter (ADC) channels.
This upgrade will allow for the seamless addition of a multi-stage battery-monitoring voltage divider assembly, providing automated, long-term battery-health diagnostics directly over the cloud interface.
References
[1] Z. He, \"Design and implementation of IoT smart doorbell,\" Proceedings of the SPIE Digital Library, vol. 14132, p. 141321T, Apr. 2026.
[2] M. E. Kutluca and M. E. ?ahin, \"The Bluetooth-based smart doorbell system for hearing-impaired users,\" Algerian Journal of Electrical Systems and Sustainability, vol. 1, no. 2, pp. 1–9, 2025.
[3] M. Neagu, \"Trustworthiness in Resource-Constrained IoT: Privacy-Enhancing Technologies and Anomaly Detection,\" MDPI Computers, vol. 7, no. 1, p. 10, 2026.
[4] P. U. Rakhmawati, \"Design and development of an Internet of Things (IoT)-based smart bell using ESP32-CAM and Telegram,\" Journal of IoT and Embedded Systems, vol. 14, no. 1, art. no. 673456, 2026.
[5] R. Syavira, \"Implementation of a smart home doorbell system for guest identification using ESP32-CAM and IoT-based Telegram chatbot integration,\" Journal of Technology and Computer (JOTECHCOM), vol. 2, no. 3, pp. 171–175, 2025.
[6] R. Wazirali, \"Selective homomorphic encryption with LLE enhances privacy and scalability in doorbell face recognition,\" IEEE Access, vol. 14, pp. 27650–27662, 2026.