Ijraset Journal For Research in Applied Science and Engineering Technology
Authors: Ravikumar Marali, Namrata S Naragundkar
DOI Link: https://doi.org/10.22214/ijraset.2026.85666
Certificate: View Certificate
This study explores the aerodynamic optimization of building forms using ETABS software. Five distinct geometric configurations were analyzed to assess their impact on wind-induced effects: a sharp corner square form, a recessed corner form, a chamfered corner form, a rounded corner form, and an optimized octagonal form. By modeling and evaluating these forms, the research aims to identify design modifications that can effectively reduce wind loads and improve structural performance. The comparative analysis provides insights into how architectural geometry influences aerodynamic behavior, informing future high-rise building designs for enhanced wind resistance and structural efficiency.
The research focuses on the comparative analysis of wind-induced structural responses in tall buildings with different corner configurations. It investigates how modifying building corners can reduce wind loads, base shear, overturning moments, roof displacement, and inter-storey drift.
As buildings become taller, wind forces become increasingly important because wind speed generally increases with height. Wind pressure can cause structural movement, vibration, and instability. Therefore, designing tall buildings requires careful consideration of building geometry, structural stiffness, dynamic behaviour, and local wind conditions.
The study examines five different building configurations using structural analysis assumptions and ETABS-related modelling concepts to identify which corner treatment provides better performance under different wind speeds.
The study considers a 75-metre-tall, 25-storey reinforced-concrete building with a nominal plan dimension of 30 m × 30 m.
Five different corner configurations are investigated:
Sharp-cornered square building.
Recessed-corner building.
Chamfered-corner building.
Rounded-corner building.
Optimized octagonal-corner building.
The main problem is the lack of a clear comparative evaluation of different corner modifications under consistent structural and wind-loading assumptions.
The main objectives are:
To investigate the effects of increasing wind speed on tall-building structural responses.
To compare the wind performance of five different corner configurations.
To identify which corner treatment reduces base shear and overturning moments.
To evaluate roof displacement and inter-storey drift.
To study how wind effects vary across different building heights.
To determine whether the optimized octagonal configuration maintains its performance across different wind speeds.
The research reviews previous studies related to wind loading, aerodynamic modifications, structural behaviour, and computational analysis.
1. Wind Loading and Structural Response
Wind affects tall buildings through three major responses:
Along-wind response: Movement caused by wind pressure and turbulence in the direction of wind.
Across-wind response: Movement caused by pressure differences and vortex shedding perpendicular to the wind direction.
Torsional response: Rotation caused by uneven wind pressure distribution around the building.
These responses influence structural stability, displacement, and occupant comfort.
2. Aerodynamic Modification Strategies
Aerodynamic modifications change the external shape of buildings to reduce wind resistance.
Common techniques include:
Building tapering.
Setbacks.
Twisting.
Corner chamfering.
Rounded corners.
Corner recessing.
Octagonal configurations.
These modifications influence airflow separation, pressure distribution, and wake formation.
3. Corner Modification Techniques
The study investigates five corner configurations.
Sharp corners create fixed flow separation and potentially higher wind pressure effects.
Recessed corners modify the airflow around building edges.
Chamfered corners cut off sharp edges to change flow separation.
Rounded corners provide curved surfaces that modify airflow and pressure distribution.
Optimized octagonal corners modify the overall plan geometry to improve aerodynamic performance.
4. CFD and Wind-Tunnel Testing
Computational Fluid Dynamics (CFD) and wind-tunnel testing are commonly used to evaluate wind effects on buildings.
CFD analyzes airflow and pressure distribution, while wind tunnels experimentally measure wind forces and pressure effects.
ETABS can then be used to evaluate structural responses such as base shear, overturning moments, displacement, and drift using appropriate wind-load inputs.
The study follows a quantitative comparative analysis of five building configurations under six different basic wind speeds.
Building specifications:
|
Parameter |
Value |
|---|---|
|
Building type |
Reinforced concrete |
|
Total height |
75 m |
|
Number of storeys |
25 |
|
Plan dimensions |
30 m × 30 m |
|
Storey height |
3 m |
|
Concrete grade |
M40 |
|
Steel grade |
Fe500 |
|
Terrain category |
Category 3 |
|
Damping ratio |
2% |
|
Height-to-width ratio |
2.5 |
Six basic wind speeds are considered:
33 m/s
39 m/s
44 m/s
47 m/s
50 m/s
55 m/s
The 47 m/s wind speed is selected as the primary comparison condition, while the other wind speeds are used to evaluate performance under different wind conditions.
The analysis includes 30 wind-and-building combinations (five configurations × six wind speeds).
The five models are identified as follows:
|
Model |
Building configuration |
Corner modification |
|---|---|---|
|
M1 |
Square with sharp corners |
0% |
|
M2 |
Recessed corners |
7.5% |
|
M3 |
Chamfered corners |
7.5% |
|
M4 |
Rounded corners |
10% |
|
M5 |
Optimized octagonal corners |
12% |
All five configurations maintain the same overall building height, nominal plan dimensions, and number of storeys.
Their approximate fundamental time periods range from 1.736 to 1.777 seconds.
The study assigns different aerodynamic force coefficients and equivalent stiffness multipliers to the five configurations.
|
Model |
Force coefficient (Cf) |
Stiffness multiplier |
|---|---|---|
|
M1 |
1.300 |
1.000 |
|
M2 |
1.178 |
0.982 |
|
M3 |
1.105 |
0.972 |
|
M4 |
1.118 |
0.975 |
|
M5 |
1.045 |
0.955 |
The values are preliminary analytical assumptions used for comparative calculations, not independently measured CFD or wind-tunnel results.
The analysis evaluates:
Wind pressure at different building heights.
Floor-wise lateral forces.
Base shear.
Overturning moment.
Roof displacement.
Inter-storey drift.
Approximate fundamental time period.
The results are compared against the sharp-cornered square building (M1), which serves as the reference model.
The main contribution of this research is to provide a systematic comparison of different aerodynamic corner modifications for a 75-metre reinforced-concrete building.
It aims to identify how changes in building geometry influence wind-induced structural behaviour and determine which configuration provides better performance across a range of wind speeds.
The research also establishes a preliminary analytical framework that can support more detailed ETABS modelling, CFD simulations, and wind-tunnel validation.
[1] A. Sharma, H. Mittal, A. Gairola (2018). “Mitigation of wind load on tall buildings through aerodynamic modifications: Review.” Journal of Building Engineering, 18, 180-194. https://doi.org/10.1016/j.jobe.2018.03.005 [2] A.H.H. Al-Masoodi, Y.M. Abbas, F. Alkhatib, M.I. Khan, N. Shafiq, M. ElGawady (2023). “Aerodynamic optimization for corner modification of octagonal-shape tall buildings using computational approach.” Journal of Building Engineering, 76, 107017. https://doi.org/10.1016/j.jobe.2023.107017 [3] S. Li, Y. Deng, Z. Zhong, Z. Chen (2023). “Effects of corner modifications on wind-induced responses of super high-rise buildings by wind tunnel tests based on a novel low-damping elastic test model.” Journal of Building Engineering, 67, 105881. https://doi.org/10.1016/j.jobe.2023.105881 [4] W.-T. Lu, B.M. Phillips, Z. Jiang (2024). “Aerodynamic responses of tall buildings with cross-section modification through additive- and subtractive-based strategies.” Journal of Wind Engineering and Industrial Aerodynamics, 250, 105762. https://doi.org/10.1016/j.jweia.2024.105762 [5] A. Elshaer, G.T. Bitsuamlak, A. El Damatty (2017). “Enhancing wind performance of tall buildings using corner aerodynamic optimization.” Engineering Structures, 136, 133-148. https://doi.org/10.1016/j.engstruct.2017.01.019 [6] Y. Li, X. Tian, K.F. Tee, Q.-S. Li, Y.-G. Li (2018). “Aerodynamic treatments for reduction of wind loads on high-rise buildings.” Journal of Wind Engineering and Industrial Aerodynamics, 172, 107-115. https://doi.org/10.1016/j.jweia.2017.11.006 [7] Y. Li, Y.-G. Li, Q.-S. Li, K.-F. Tee (2019). “Investigation of wind effect reduction on square high-rise buildings by corner modification.” Advances in Structural Engineering, 22(6). https://doi.org/10.1177/1369433218816111 [8] Y. Li, C. Li, Q.-S. Li, Q. Song, X. Huang, Y.-G. Li (2020). “Aerodynamic performance of CAARC standard tall building model by various corner chamfers.” Journal of Wind Engineering and Industrial Aerodynamics, 202, 104197. https://doi.org/10.1016/j.jweia.2020.104197 [9] G.W. Alminhana, A.L. Braun, A.M. Loredo-Souza (2018). “A numerical-experimental investigation on the aerodynamic performance of CAARC building models with geometric modifications.” Journal of Wind Engineering and Industrial Aerodynamics, 180, 34-48. https://doi.org/10.1016/j.jweia.2018.07.001 [10] M. Mooneghi, B. Kargarmoakhar (2016). “Aerodynamic Mitigation and Shape Optimization of Buildings: Review.” Journal of Building Engineering, 6, 225-235. https://doi.org/10.1016/j.jobe.2016.01.009 [11] M. Jafari, A. Alipour (2021). “Methodologies to mitigate wind-induced vibration of tall buildings: A state-of-the-art review.” Journal of Building Engineering, 33, 101582. https://doi.org/10.1016/j.jobe.2020.101582 [12] M. Jafari, A. Alipour (2021). “Aerodynamic shape optimization of rectangular and elliptical double-skin façades to mitigate wind-induced effects on tall buildings.” Journal of Wind Engineering and Industrial Aerodynamics, 213, 104586. https://doi.org/10.1016/j.jweia.2021.104586 [13] M.S. Thordal, J.C. Bennetsen, H.H. Koss (2019). “Review for practical application of CFD for the determination of wind load on high-rise buildings.” Journal of Wind Engineering and Industrial Aerodynamics, 186, 155-168. https://doi.org/10.1016/j.jweia.2018.12.019 [14] P. Sanyal, S.K. Dalui (2020). “Effect of corner modifications on Y plan shaped tall building under wind load.” Wind and Structures, 30(3), 245-260. https://doi.org/10.12989/was.2020.30.3.245 [15] S. Mandal, S.K. Dalui, S. Bhattacharjya (2021). “Wind induced response of corner modified U plan shaped tall building.” Wind and Structures, 32(6), 521-537. https://doi.org/10.12989/was.2021.32.6.521 [16] S. Bhattacharya, S.K. Dalui (2022). “Effect of Aerodynamic Modification on V plan Shaped Tall Building Under Wind Excitation.” ASPS Conference Proceedings, 1(5). https://doi.org/10.38208/acp.v1.679 [17] S. Mandal, S.K. Dalui, S. Bhattacharjya (2022). “Wind-Induced effect on different corner positions of corner-modified irregular plan-shaped tall building.” Lecture Notes in Mechanical Engineering, 311-323. https://doi.org/10.1007/978-981-16-6738-1_26 [18] K.T. Tse, G. Hu, C. Song, H.S. Park, Y.C. Kim (2021). “Effects of corner modifications on wind loads and local pressures on walls of tall buildings.” Building Simulation, 14(4), 1109-1126. https://doi.org/10.1007/s12273-020-0705-3 [19] F. Alkhatib, N. Kasim, W.I. Goh, N. Shafiq, M. Amran, E.V. Kotov, M.A. Albaom (2022). “Computational Aerodynamic Optimization of Wind-Sensitive Irregular Tall Buildings.” Buildings, 12(7), 939. https://doi.org/10.3390/buildings12070939 [20] X. Xu, Q. Yang, A. Yoshida, Y. Tamura (2017). “Characteristics of pedestrian-level wind around super-tall buildings with various configurations.” Journal of Wind Engineering and Industrial Aerodynamics, 166, 61-73. https://doi.org/10.1016/j.jweia.2017.03.013 [21] Y. Tamura, X. Xu, H. Tanaka, Y.C. Kim, A. Yoshida, Q. Yang (2017). “Aerodynamic and Pedestrian-Level Wind Characteristics of Super-Tall Buildings with Various Configurations.” Procedia Engineering, 199, 28-37. https://doi.org/10.1016/j.proeng.2017.09.146 [22] T. Deng, J. Fu, Q. Zheng, J. Wu, et al. (2019). “Performance-Based Wind-Resistant Optimization Design for Tall Building Structures.” Journal of Structural Engineering, 145(10), 04019103. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002383 [23] M.A. Bezabeh, G.T. Bitsuamlak, S. Tesfamariam (2020). “Performance-based wind design of tall buildings: concepts, frameworks, and opportunities.” Wind and Structures, 31(2), 103-142. https://doi.org/10.12989/was.2020.31.2.103 [24] W. Cui, L. Caracoglia (2020). “Performance-based wind engineering of tall buildings examining life-cycle downtime and multisource wind damage.” Journal of Structural Engineering, 146(1), 04019179. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002479 [25] J. Wu (2019). “Dynamic performance evaluation of Shanghai Tower under winds based on full-scale data.” The Structural Design of Tall and Special Buildings, 28, e1611. https://doi.org/10.1002/tal.1611 [26] Y.-H. Juan, A. Rezaeiha, H. Montazeri, B. Blocken, A.-S. Yang (2024). “Improvement of wind energy potential through building corner modifications in compact urban areas.” Journal of Wind Engineering and Industrial Aerodynamics, 248, 105710. https://doi.org/10.1016/j.jweia.2024.105710 [27] A. Baghaei Daemei, E.M. Eghbali, M. Khotbehsara (2019). “Study on wind aerodynamic and flow characteristics of triangular-shaped tall buildings and CFD simulation in order to assess drag coefficient.” Ain Shams Engineering Journal, 10(3), 541-548. https://doi.org/10.1016/j.asej.2018.08.008 [28] E. Bernardini, S.M.J. Spence, D. Wei, A. Kareem (2015). “Aerodynamic shape optimization of civil structures: A CFD-enabled Kriging-based approach.” Journal of Wind Engineering and Industrial Aerodynamics, 144, 154-164. https://doi.org/10.1016/j.jweia.2015.03.011 [29] S. Tanios (2016). “Structural Design and Analysis of High-Rise Buildings Subject to Seismic and Wind Loads: A Case Study.” Master of Engineering Thesis, Lebanese University, Faculty of Engineering - Branch II. https://doi.org/10.13140/RG.2.2.33414.70725/1 [30] Bureau of Indian Standards (2015). IS 875 (Part 3):2015, Design Loads (Other than Earthquake) for Buildings and Structures - Code of Practice, Part 3: Wind Loads (Third Revision). New Delhi: Bureau of Indian Standards.
Copyright © 2026 Ravikumar Marali, Namrata S Naragundkar. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Paper Id : IJRASET85666
Publish Date : 2026-11-11
ISSN : 2321-9653
Publisher Name : IJRASET
DOI Link : Click Here
Submit Paper Online
