Development and Investigation of Mechanical Properties on Eggshell Powder and Bamboo Fibre Reinforced Polycarbonate Bio-Composite Used for Prosthetic Implants
Authors: Keshava V. S., Dr. Hanumantharaju H. G., Meghana M. V., Rajeev M. N., Dattu Mulge
Polycarbonate (PC) is a high-performance thermoplastic valued for its impact resistance, toughness and dimensional stability. Bamboo fibre (BF) and eggshell powder (ESP), a calcium-carbonate-rich waste-derived filler, are potential reinforcements for developing hybrid polymer composites with renewable and waste-utilization benefits. This review examines the scientific basis for combining PC, BF and ESP, with emphasis on constituent characteristics, processing, fibre and particle interfaces, structure–property relationships, tribological behaviour and potential prosthetic or assistive applications. Published reviews of bamboo-fibre polymer composites and eggshell-derived calcium carbonate fillers are considered alongside recent direct evidence on bamboo-reinforced bio-polycarbonate. The literature indicates that reinforcement performance depends on fibre geometry, surface treatment, particle size, dispersion, moisture control and thermal history. Bamboo fibres can provide fibrous load transfer, while eggshell-derived particles may modify stiffness and hardness; however, weak interfaces, agglomeration and voids can reduce tensile strength and impact resistance. A critical processing issue is the need to melt-process PC without thermally damaging lignocellulosic fibres. The review identifies research needs in drying, compatibilization, processing-window optimization, impact and fatigue testing, wear characterization and environmental ageing. The available evidence supports further investigation of these materials for external prosthetic and assistive components, but it does not establish implant safety, biocompatibility or clinical suitability. The review provides a literature-based framework for subsequent experimental investigation of the ternary PC/BF/ESP system.
Introduction
The development of lightweight, strong and cost-effective engineering materials has increased interest in natural fibres and waste-derived fillers for polymer composites. Bamboo fibre is a renewable reinforcement, while eggshell powder is a rich source of calcium carbonate (CaCO?). Combining these materials with Polycarbonate (PC) offers an opportunity to develop sustainable hybrid composites with potential applications in engineering and prosthetic components.
This review focuses on the development and properties of a Polycarbonate (PC), Bamboo Fibre (BF) and Eggshell Powder (ESP) hybrid composite. The main objective is to understand how these three materials can work together to improve mechanical performance while promoting the utilization of renewable resources and biological waste.
The three main constituents are:
Polycarbonate (PC): Acts as the polymer matrix, providing toughness, impact resistance, dimensional stability and good mechanical properties. Proper drying and temperature control are essential during processing to prevent moisture-related degradation.
Bamboo Fibre (BF): Acts as a natural reinforcement that can improve the strength and stiffness of the composite. However, untreated bamboo fibres may have poor bonding with the polycarbonate matrix due to differences in their surface chemistry.
Eggshell Powder (ESP): Acts as a mineral filler containing predominantly calcium carbonate. It can improve stiffness and hardness, reduce material costs and promote the recycling of eggshell waste. However, excessive filler content or poor dispersion may reduce tensile strength and impact resistance.
The review highlights the importance of proper material preparation and processing to achieve better composite performance. Bamboo fibres may undergo alkali or silane treatment to improve surface characteristics and interfacial bonding. Eggshell powder requires cleaning, drying, grinding and sieving to obtain a suitable particle-size distribution.
The major processing steps include:
Collection and preparation of bamboo fibres and eggshell waste.
Cleaning, drying and surface treatment of the reinforcement materials.
Grinding and sieving eggshell powder to obtain uniform particle sizes.
Melt compounding of polycarbonate with bamboo fibres and eggshell powder.
Compression moulding or injection moulding to produce composite specimens.
Mechanical, thermal and microstructural characterization of the prepared composites.
The mechanical and structural properties of the hybrid composite depend on several factors, including fibre content, particle size, moisture, processing temperature, interfacial adhesion and reinforcement distribution.
The major testing and characterization techniques include:
Tensile testing: To determine tensile strength and deformation behaviour.
Flexural testing: To evaluate bending strength and stiffness.
Impact testing: To measure resistance to sudden loading.
Hardness testing: To evaluate resistance to surface deformation.
SEM analysis: To examine fibre–matrix bonding, particle distribution, cracks, voids and fracture surfaces.
EDS/EDAX analysis: To identify calcium and other elements present in the composite.
XRD analysis: To identify crystalline phases, particularly calcium carbonate.
FTIR analysis: To investigate chemical functional groups and possible interactions between composite constituents.
The literature indicates that good interfacial bonding between bamboo fibres and polycarbonate is essential for effective load transfer. Similarly, uniform eggshell particle dispersion helps improve the contribution of the mineral filler. Poor bonding, moisture absorption, fibre damage and particle agglomeration can negatively affect the final mechanical properties.
An important potential application of this hybrid composite is the development of external prosthetic and assistive components. Its combination of a tough polymer matrix, natural fibre reinforcement and mineral filler may offer opportunities for producing lightweight, economical and durable components. However, additional testing for fatigue, impact resistance, cyclic loading and functional performance is necessary before considering practical prosthetic applications.
Conclusion
Bamboo fibre and eggshell-derived calcium carbonate offer complementary reinforcement opportunities for polycarbonate-based hybrid composites. Bamboo can contribute fibrous load transfer and renewable content, while eggshell powder can provide a waste-derived mineral filler. PC provides a tough thermoplastic matrix, but the final properties depend on fibre treatment, particle dispersion, interfacial adhesion, moisture control and thermal processing history.
Published reviews establish the promise and limitations of bamboo-fibre polymer composites and eggshell/CaCO?-filled polymers. A recent direct study on bamboo-fibre-reinforced bio-polycarbonate further demonstrates that surface modification can improve interfacial performance in the investigated material system. Nevertheless, results from other matrices and bio-PC laminates cannot be transferred uncritically to conventional PC containing both bamboo fibre and eggshell powder.
The most important unresolved issue is the processing and interface design of the complete ternary system. Future work should combine careful drying, controlled fibre treatment, particle-size optimization, compatibilization and systematic mechanical, thermal, rheological, tribological and ageing tests. The material may warrant investigation for external prosthetic and assistive components, but current evidence does not establish implant suitability or biocompatibility. Such claims require dedicated biological, chemical, durability and regulatory evaluation.
References
[1] A. M. Radzi, S. A. Zaki, M. Z. Hassan, R. A. Ilyas, K. R. Jamaludin, M. Y. Md Daud, and S. A. Aziz, “Bamboo-fiber-reinforced thermoset and thermoplastic polymer composites: A review of properties, fabrication, and potential applications,” Polymers, vol. 14, no. 7, Art. no. 1387, 2022, doi: 10.3390/polym14071387.
[2] H. Yu, J. Wu, Y. Gao, Z. Lu, and W. Hu, “Research progress on bamboo fiber reinforced polymeric composites: Processes, properties, and future directions,” Polymer Composites, vol. 45, no. 11, pp. 9629–9646, 2024, doi: 10.1002/pc.28436.
[3] D. Apostolidis, P. Jayaraman, and B. Kumru, “Interplay of fiber surface properties and processing on the performance of sustainable bamboo-reinforced bio-polycarbonate composites,” Advanced Sustainable Systems, vol. 10, no. 3, Art. no. e01376, 2026, doi: 10.1002/adsu.202501376.
[4] S. Owuamanam and D. Cree, “Progress of bio-calcium carbonate waste eggshell and seashell fillers in polymer composites: A review,” Journal of Composites Science, vol. 4, no. 2, Art. no. 70, 2020, doi: 10.3390/jcs4020070.
[5] Bureau of Indian Standards, IS 14434:2023, “Polycarbonate moulding and extrusion materials—Code of good processing practices,” 2023.
[6] A. Homavand, D. E. Cree, and L. D. Wilson, “Polylactic acid composites reinforced with eggshell/CaCO? filler particles: A review,” Waste, vol. 2, no. 2, pp. 169–185, 2024, doi: 10.3390/waste2020010.
[7] S. Shettigar, M. C. Gowrishankar, and M. Shettar, “Review on aging behavior and durability enhancement of bamboo fiber-reinforced polymer composites,” Molecules, vol. 30, no. 15, Art. no. 3062, 2025, doi: 10.3390/molecules30153062.
[8] P. S., H. G. Hanumantharaju, S. P. R., J. Aravind, and N. Venkatesh, “FEA on polycarbonate and micro cellular rubber used for foot prosthetic implants,” International Journal of Innovative Science and Research Technology, vol. 11, no. 2, 2026, doi: 10.38124/ijisrt/26feb939.