Polypropylene (PP) is an attractive thermoplastic matrix for lightweight engineering components because of its low density, chemical resistance and compatibility with conventional melt-processing methods. Its mechanical response can be modified through fibre and particulate reinforcement. This review examines the potential of combining chopped bamboo fibre and eggshell powder in PP, with maleic-anhydride-grafted polypropylene (MAPP) as a compatibilizing agent, and considers the relevance of this material family to external lower-limb prosthetic components. The discussion covers natural-fibre/PP composites, bamboo-fibre reinforcement and surface modification, eggshell-derived calcium-carbonate fillers, hybrid reinforcement, processing effects and prosthetic performance requirements. Bamboo fibre may contribute reinforcement when fibre length, treatment, orientation and interfacial stress transfer are controlled, whereas eggshell powder can act as a mineral filler whose effects depend on particle size, loading and dispersion. The combination offers a potential route to valorize renewable and waste-derived feedstocks, but increased stiffness may be accompanied by reduced elongation or impact tolerance. MAPP is a potential compatibilization strategy, although its effectiveness depends on fibre treatment and processing conditions. The review identifies a need to evaluate hybrid PP composites containing bamboo fibre, MAPP and varying eggshell-powder contents using matched controls and consistent mechanical, microstructural and durability testing. Current evidence supports further material development but does not establish clinical suitability or the safety of a finished prosthetic device.
Introduction
Polymer-matrix composites are advanced materials produced by combining a polymer matrix with reinforcing materials such as fibres and particles to improve their mechanical and functional properties. Natural-fibre composites have gained attention because they are lightweight, renewable, economical and environmentally friendly alternatives to conventional synthetic-fibre composites.
This review focuses on the development and potential applications of a hybrid composite made from Polypropylene (PP), bamboo fibre and eggshell powder, particularly for lower-limb prosthetic components.
The study considers three main materials:
Polypropylene (PP): Acts as the base polymer matrix, providing low density, chemical resistance, durability and easy processing through extrusion and injection moulding.
Bamboo Fibre: Serves as a natural reinforcement that can improve the stiffness and strength of the composite. However, its hydrophilic nature can lead to poor bonding with the non-polar PP matrix.
Eggshell Powder: Acts as a calcium-carbonate-rich mineral filler obtained from waste eggshells. It can improve stiffness and hardness while promoting waste utilization and sustainable material development.
The literature review indicates that bamboo fibre requires suitable surface treatment, such as alkali treatment, to remove surface impurities and improve bonding with the polymer matrix. Maleic Anhydride Grafted Polypropylene (MAPP) is also used as a compatibilizing agent to improve interfacial adhesion and load transfer between bamboo fibres and the PP matrix.
Eggshell powder can increase the tensile modulus and hardness of polypropylene composites. However, excessive filler content or poor particle dispersion may reduce tensile strength, elongation and impact resistance. Therefore, the filler percentage must be carefully optimized.
The proposed hybrid composite formulation for further investigation consists of:
5 wt.% chopped bamboo fibre.
3 wt.% MAPP as a compatibilizer.
10–15 wt.% eggshell powder.
Polypropylene as the remaining matrix material.
The review highlights the importance of controlling fibre length, particle size, moisture content, mixing conditions and injection-moulding parameters to achieve uniform reinforcement distribution and better composite performance.
The major characterization and testing methods recommended include:
Tensile testing: To determine tensile strength and elongation.
Flexural testing: To evaluate bending strength and stiffness.
Compression testing: To measure resistance to compressive loads.
Abrasion testing: To evaluate wear resistance.
Impact and fatigue testing: To assess resistance to sudden forces and repeated loading.
Scanning Electron Microscopy (SEM): To examine fibre bonding, particle distribution, cracks, voids and fracture surfaces.
Energy Dispersive X-ray Spectroscopy (EDS/EDAX): To identify elements such as calcium in eggshell-containing regions.
An important application of this hybrid composite is the development of lower-limb prosthetic components, particularly prosthetic feet. Material selection for prosthetic applications requires a suitable combination of low weight, strength, stiffness, impact resistance, fatigue durability and affordability. However, mechanical testing of composite specimens alone is not sufficient to establish the safety of a complete prosthetic device. Prototype development, structural analysis, cyclic testing and functional validation are also necessary.
Conclusion
The literature reviewed indicates that bamboo fibre and eggshell powder are promising complementary reinforcement candidates for polypropylene, but their effects are governed by interfacial compatibility, fibre and particle geometry, dispersion and processing history. Bamboo-fibre/PP studies emphasize the importance of surface modification and MAPP compatibilization, while eggshell-filled PP studies show that stiffness gains may be accompanied by losses in tensile strength, elongation or impact resistance. The hybrid system must therefore be optimized for a balanced set of properties.
The formulation range identified in the related project—5 wt.% bamboo fibre, 3 wt.% MAPP and 10–15 wt.% eggshell powder—provides a focused experimental question for a subsequent original research paper. The literature review alone does not establish which formulation is optimal, nor does it establish prosthetic-device suitability. Future work should use matched controls, fully reported processing parameters, statistically supported mechanical testing, quantitative microstructural analysis and component-level validation before any application claim is made.
References
[1] Malkapuram, R., Kumar, V. and Negi, Y.S. (2009). Recent development in natural fiber reinforced polypropylene composites.
[2] Barkoula, N.M., Garkhail, S.K. and Peijs, T. (2010). Effect of compounding and injection molding on the mechanical properties of flax fiber polypropylene composites. Journal of Reinforced Plastics and Composites. DOI: 10.1177/0731684409104465.
[3] Sun, Z.Y., Han, H.S. and Dai, G.C. (2010). Mechanical properties of injection-molded natural fiber-reinforced polypropylene composites: Formulation and compounding processes. Journal of Reinforced Plastics and Composites, 29. DOI: 10.1177/0731684408100264.
[4] Pickering, K.L., Efendy, M.G.A. and Le, T.M. (2016). A review of recent developments in natural fibre composites and their mechanical performance. Composites Part A: Applied Science and Manufacturing, 83, 98–112. DOI: 10.1016/j.compositesa.2015.08.038.
[5] Rajak, D.K. et al. (2019). Fiber-reinforced polymer composites: Manufacturing, properties, and applications. Polymers, 11, 1667.
[6] Hidalgo-Salazar, M.A. et al. (2019). Mechanical, thermal, viscoelastic performance and product application of PP–rice husk Colombian biocomposites.
[7] Rabbani, F.A. et al. (2022). Experimental study of mechanical properties of polypropylene random copolymer and rice-husk-based biocomposite by using nanoindentation.
[8] Yousef, N.S. (2022). Statistical study on additives used to improve mechanical properties of polypropylene.
[9] Chattopadhyay, S.K., Khandal, R.K., Uppaluri, R. and Ghoshal, A.K. (2011). Bamboo fiber reinforced polypropylene composites and their mechanical, thermal, and morphological properties. Journal of Applied Polymer Science, 119, 1619–1626. DOI: 10.1002/app.32826.
[10] Abdul Khalil, H.P.S. et al. (2012). Bamboo fibre reinforced biocomposites: A review. Materials & Design, 42, 353–368.
[11] Ibrahim, I.D., Jamiru, T., Sadiku, R.E. et al. (2015). The use of polypropylene in bamboo fibre composites and their mechanical properties – A review. Journal of Reinforced Plastics and Composites, 34, 1347–1356. DOI: 10.1177/0731684415591302.
[12] Yang, F., Long, H., Xie, B. et al. (2020). Mechanical and biodegradation properties of bamboo fiber-reinforced starch/polypropylene biodegradable composites. Journal of Applied Polymer Science, 137, 48694. DOI: 10.1002/app.48694.
[13] Martijanti et al. (2021). Polymer composite fabrication reinforced with bamboo fiber for particle board product raw material application.
[14] Cabrera de Lima, L.P.F. et al. (2021). Use of organic acids in bamboo fiber-reinforced polypropylene composites: Mechanical properties and interfacial morphology.
[15] Zhao et al. (2024). Forming performance and environmental impact of bamboo fiber reinforced polypropylene composites based on injection molding process for automobiles.
[16] Koutsawa, Y., Chrysafi, I., Berthé, V. et al. (2026). Experimental and numerical characterization of the tensile behavior of short-bamboo-fiber-reinforced polypropylene composites. Composite Structures, 397, 120805. DOI: 10.1016/j.compstruct.2026.120805.
[17] Xia, L. et al. (2026). Rapid screening of maleated polyolefin coupling agents for high-strength short bamboo fiber-reinforced polypropylene composites.
[18] Ghabeer, T., Dweiri, R. and Al-Khateeb, S. (2013). Thermal and mechanical characterization of polypropylene/eggshell biocomposites. Journal of Reinforced Plastics and Composites, 32(6), 402–409. DOI: 10.1177/0731684412470015.
[19] Kumar, R., Dhaliwal, J.S. and Kapur, G.S. (2014). Mechanical properties of modified biofiller-polypropylene composites. Polymer Composites. DOI: 10.1002/pc.22714.
[20] Hassen, A.A., Dizbay-Onat, M., Bansal, D., Bayush, T. and Vaidya, U. (2015). Utilization of chicken eggshell waste as a bio-filler for thermoplastic polymers. Polymers and Polymer Composites, 23, 653. DOI: 10.1177/096739111502300908.
[21] Mustapha, K., Ayinla, R., Ottan, A.S. and Owoseni, T.A. (2020). Mechanical properties of calcium carbonate/eggshell particle filled polypropylene composites. MRS Advances.
[22] Hayajneh, M. et al. (2021). Hybrid green organic/inorganic filler polypropylene composites: Morphological study and mechanical performance investigations.
[23] Younis and El-Wakil (2021). New composites from waste polypropylene/eggshell characterized by high flame retardant and mechanical properties.
[24] Barbaz-Isfahani, R. et al. (2023). Synergistic effects of egg shell powder and halloysite clay nanotubes on the thermal and mechanical properties of abacá/polypropylene composites.
[25] Akhtar, M.N. et al. (2016). Influence of alkaline treatment and fiber loading on the physical and mechanical properties of kenaf/polypropylene composites for variety of applications.
[26] Aridi, N.A.M. et al. (2016). Mechanical and morphological properties of injection-molded rice husk polypropylene composites.
[27] Md Radzi et al. (2018). The effect of kenaf filler reinforcement on the mechanical and physical properties of injection moulded polypropylene composites.
[28] George, J. et al. (2020/2021 as reported in the literature). Biocarbon reinforced polypropylene composite: An investigation of mechanical and filler behaviour through advanced dynamic atomic force microscopy and X-ray micro-CT.
[29] Rabbi, M.S., Islam, T. and Islam, G.M.S. (2021). Injection-molded natural fiber-reinforced polymer composites – A review. Journal of Materials Science: Materials in Engineering, 16, 15.
[30] Liu, Y. and Wang, M. et al. (2007). Fabrication and characteristics of hydroxyapatite reinforced polypropylene as a bone analogue biomaterial.
[31] Chan, K.W. et al. (2015). Polypropylene biocomposites with boron nitride and nanohydroxyapatite reinforcements.
[32] Obaid, M.N. et al. (2021). Characteristic of polypropylene nanocomposite material reinforcement with hydroxyapatite for bone replacement.
[33] Castro-Franco, A.D., Siqueiros-Hernández, M., García-Angel, V. et al. (2024). A review of natural fiber-reinforced composites for lower-limb prosthetic designs. Polymers, 16(9), 1293. DOI: 10.3390/polym16091293.
[34] Mijar, A.N. (2024). Exploring materials and techniques in Jaipur Foot manufacturing: A review.
[35] Lamesgin, H.B. and van der Stoel, K. (2026). Bamboo medical application: A state-of-the-art review. Advanced Materials Technologies. DOI: 10.1002/admt.71014.